The assembly of the Screen2go can be done in less than 4 minutes with a little practice. Some claim sooner! Below are the basic steps. A more detailed instruction pamphlet accompanies your Screen2go.
1. After removing all the frame pieces, start with the main frame. Separate the legs, and tighten the locking screw.
2. Next. put the top and bottom screen braces together. They are held together with an elastic cord and simply screw together. .
3. Using either one, insert into the top of the screen and secure with the velcro tab. Do the same with the bottom of the screen.
4. Find the keystone adaptor, and attach to the center of the screen. The holes will connect the screen to the main frame.
5.Secure the screen from moving by using the supplied attached tie. That's all there is to it!